Classification of glass edging machines and precautions when using them

[China Glass Net] 1. Precautions for the use of glass straight line edging machine: The linear edging machine (straight edge machine, round edge machine, beveling machine) works by clamping the glass and driving the straight line through the front and rear pressure plates. The movement is grinding. There are two points to be aware of during use: 1 The front and rear platen and the rail joint surface should be lubricated frequently, otherwise the normal service life of the machine will be affected by the premature wear of the front and rear pressure plates and the guide rail working surface. Although some models have automatic lubrication devices, they should always check whether the lubrication pipelines are unblocked. 2 The clamping force should be appropriate when clamping the glass. Too loose affects the grinding quality. Too tight will increase the load of the machine and is easy to produce. Jitter crawling, it is easy to break the glass when grinding thin glass. The clamping force can be tested on the machine with a slightly larger glass clamp, that is, the glass is clamped in the middle of the machine. When the machine is stopped, the two hands force the glass to move the glass, and it is suitable to adjust the clamping force to just when the hands are not moving.

2. Precautions when using the glass profiled edging machine: 1 Whether the height of the suction plate of the special-shaped machine table is consistent has a great influence on the grinding effect. At the time of assembly, the manufacturer has self-grinded the five sets of suction cup holders, and selected the suction cup glue with the same thickness to keep the height of each suction cup consistent. Therefore, under normal circumstances, do not disassemble the suction cup. If the suction pad is damaged, choose a uniform thickness to replace it. 2 After using the vacuum pump of the special-shaped machine for a period of time, the degree of vacuum will drop due to water inflow (ie, the suction is reduced). Therefore, it is necessary to check and eliminate the fault. Otherwise, the machine will work under the condition of insufficient suction, which will affect the grinding. Cutting quality, on the other hand, is prone to safety incidents.

3, the use of bilateral edging machine Note: 1 bilateral edging machine is a higher grade edging machine, it is better to fix two to three operations to ensure correct operation. 2 When there is an error or malfunction in the procedure of the bilateral grinding, it is better to send the original manufacturer to repair and debug. Under normal circumstances, do not dismantle it, so as to avoid the disorder caused by the disorder.

4. Precautions when using the moulding machine: 1 The mould of the moulding machine has a great influence on the grinding precision. The working surface of the template must be accurate in shape and high in finish. If the profile is against the template, the transition must be smooth. 2 When replacing the template and the suction cup, be sure to keep the level of the suction cup working surface, otherwise the grinding quality will be affected.

In addition to the edging machine described above, there are some edging machines with simple structure and single use, such as chamfering machine, small wafer machine, polishing machine, etc. In addition, there are special edging machines that specialize in processing certain products, such as car rearview mirror edging machines and hand basin edging machines.

Proper and rational use of the glass edger not only ensures normal production, but also extends the life of the machine.

Yarn Dyed Shirts

Yarn Dyed Shirts,Cotton Casual Shirt,Cotton Yarn Dyed Shirt,Yarn Dyed Stripe Shirt

Shaoxing Shanhe garments co.,ltd ,